Merge remote branch 'origin/modesetting-101' into modesetting-101

1 files changed, 1203 insertions, 0 deletions

diff --git a/linux-core/intel_display.c b/linux-core/intel_display.c
new file mode 100644
index 00000000..aed86231
--- /dev/null
+++ b/linux-core/intel_display.c
@@ -0,0 +1,1203 @@
+/*
+ * Copyright © 2006-2007 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ */
+
+#include <linux/i2c.h>
+#include "drmP.h"
+#include "intel_drv.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+
+bool intel_pipe_has_type (struct drm_crtc *crtc, int type);
+
+typedef struct {
+    /* given values */    
+    int n;
+    int m1, m2;
+    int p1, p2;
+    /* derived values */
+    int	dot;
+    int	vco;
+    int	m;
+    int	p;
+} intel_clock_t;
+
+typedef struct {
+    int	min, max;
+} intel_range_t;
+
+typedef struct {
+    int	dot_limit;
+    int	p2_slow, p2_fast;
+} intel_p2_t;
+
+#define INTEL_P2_NUM		      2
+
+typedef struct {
+    intel_range_t   dot, vco, n, m, m1, m2, p, p1;
+    intel_p2_t	    p2;
+} intel_limit_t;
+
+#define I8XX_DOT_MIN		  25000
+#define I8XX_DOT_MAX		 350000
+#define I8XX_VCO_MIN		 930000
+#define I8XX_VCO_MAX		1400000
+#define I8XX_N_MIN		      3
+#define I8XX_N_MAX		     16
+#define I8XX_M_MIN		     96
+#define I8XX_M_MAX		    140
+#define I8XX_M1_MIN		     18
+#define I8XX_M1_MAX		     26
+#define I8XX_M2_MIN		      6
+#define I8XX_M2_MAX		     16
+#define I8XX_P_MIN		      4
+#define I8XX_P_MAX		    128
+#define I8XX_P1_MIN		      2
+#define I8XX_P1_MAX		     33
+#define I8XX_P1_LVDS_MIN	      1
+#define I8XX_P1_LVDS_MAX	      6
+#define I8XX_P2_SLOW		      4
+#define I8XX_P2_FAST		      2
+#define I8XX_P2_LVDS_SLOW	      14
+#define I8XX_P2_LVDS_FAST	      14 /* No fast option */
+#define I8XX_P2_SLOW_LIMIT	 165000
+
+#define I9XX_DOT_MIN		  20000
+#define I9XX_DOT_MAX		 400000
+#define I9XX_VCO_MIN		1400000
+#define I9XX_VCO_MAX		2800000
+#define I9XX_N_MIN		      3
+#define I9XX_N_MAX		      8
+#define I9XX_M_MIN		     70
+#define I9XX_M_MAX		    120
+#define I9XX_M1_MIN		     10
+#define I9XX_M1_MAX		     20
+#define I9XX_M2_MIN		      5
+#define I9XX_M2_MAX		      9
+#define I9XX_P_SDVO_DAC_MIN	      5
+#define I9XX_P_SDVO_DAC_MAX	     80
+#define I9XX_P_LVDS_MIN		      7
+#define I9XX_P_LVDS_MAX		     98
+#define I9XX_P1_MIN		      1
+#define I9XX_P1_MAX		      8
+#define I9XX_P2_SDVO_DAC_SLOW		     10
+#define I9XX_P2_SDVO_DAC_FAST		      5
+#define I9XX_P2_SDVO_DAC_SLOW_LIMIT	 200000
+#define I9XX_P2_LVDS_SLOW		     14
+#define I9XX_P2_LVDS_FAST		      7
+#define I9XX_P2_LVDS_SLOW_LIMIT		 112000
+
+#define INTEL_LIMIT_I8XX_DVO_DAC    0
+#define INTEL_LIMIT_I8XX_LVDS	    1
+#define INTEL_LIMIT_I9XX_SDVO_DAC   2
+#define INTEL_LIMIT_I9XX_LVDS	    3
+
+static const intel_limit_t intel_limits[] = {
+    { /* INTEL_LIMIT_I8XX_DVO_DAC */
+        .dot = { .min = I8XX_DOT_MIN,		.max = I8XX_DOT_MAX },
+        .vco = { .min = I8XX_VCO_MIN,		.max = I8XX_VCO_MAX },
+        .n   = { .min = I8XX_N_MIN,		.max = I8XX_N_MAX },
+        .m   = { .min = I8XX_M_MIN,		.max = I8XX_M_MAX },
+        .m1  = { .min = I8XX_M1_MIN,		.max = I8XX_M1_MAX },
+        .m2  = { .min = I8XX_M2_MIN,		.max = I8XX_M2_MAX },
+        .p   = { .min = I8XX_P_MIN,		.max = I8XX_P_MAX },
+        .p1  = { .min = I8XX_P1_MIN,		.max = I8XX_P1_MAX },
+	.p2  = { .dot_limit = I8XX_P2_SLOW_LIMIT,
+		 .p2_slow = I8XX_P2_SLOW,	.p2_fast = I8XX_P2_FAST },
+    },
+    { /* INTEL_LIMIT_I8XX_LVDS */
+        .dot = { .min = I8XX_DOT_MIN,		.max = I8XX_DOT_MAX },
+        .vco = { .min = I8XX_VCO_MIN,		.max = I8XX_VCO_MAX },
+        .n   = { .min = I8XX_N_MIN,		.max = I8XX_N_MAX },
+        .m   = { .min = I8XX_M_MIN,		.max = I8XX_M_MAX },
+        .m1  = { .min = I8XX_M1_MIN,		.max = I8XX_M1_MAX },
+        .m2  = { .min = I8XX_M2_MIN,		.max = I8XX_M2_MAX },
+        .p   = { .min = I8XX_P_MIN,		.max = I8XX_P_MAX },
+        .p1  = { .min = I8XX_P1_LVDS_MIN,	.max = I8XX_P1_LVDS_MAX },
+	.p2  = { .dot_limit = I8XX_P2_SLOW_LIMIT,
+		 .p2_slow = I8XX_P2_LVDS_SLOW,	.p2_fast = I8XX_P2_LVDS_FAST },
+    },
+    { /* INTEL_LIMIT_I9XX_SDVO_DAC */
+        .dot = { .min = I9XX_DOT_MIN,		.max = I9XX_DOT_MAX },
+        .vco = { .min = I9XX_VCO_MIN,		.max = I9XX_VCO_MAX },
+        .n   = { .min = I9XX_N_MIN,		.max = I9XX_N_MAX },
+        .m   = { .min = I9XX_M_MIN,		.max = I9XX_M_MAX },
+        .m1  = { .min = I9XX_M1_MIN,		.max = I9XX_M1_MAX },
+        .m2  = { .min = I9XX_M2_MIN,		.max = I9XX_M2_MAX },
+        .p   = { .min = I9XX_P_SDVO_DAC_MIN,	.max = I9XX_P_SDVO_DAC_MAX },
+        .p1  = { .min = I9XX_P1_MIN,		.max = I9XX_P1_MAX },
+	.p2  = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
+		 .p2_slow = I9XX_P2_SDVO_DAC_SLOW,	.p2_fast = I9XX_P2_SDVO_DAC_FAST },
+    },
+    { /* INTEL_LIMIT_I9XX_LVDS */
+        .dot = { .min = I9XX_DOT_MIN,		.max = I9XX_DOT_MAX },
+        .vco = { .min = I9XX_VCO_MIN,		.max = I9XX_VCO_MAX },
+        .n   = { .min = I9XX_N_MIN,		.max = I9XX_N_MAX },
+        .m   = { .min = I9XX_M_MIN,		.max = I9XX_M_MAX },
+        .m1  = { .min = I9XX_M1_MIN,		.max = I9XX_M1_MAX },
+        .m2  = { .min = I9XX_M2_MIN,		.max = I9XX_M2_MAX },
+        .p   = { .min = I9XX_P_LVDS_MIN,	.max = I9XX_P_LVDS_MAX },
+        .p1  = { .min = I9XX_P1_MIN,		.max = I9XX_P1_MAX },
+	/* The single-channel range is 25-112Mhz, and dual-channel
+	 * is 80-224Mhz.  Prefer single channel as much as possible.
+	 */
+	.p2  = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
+		 .p2_slow = I9XX_P2_LVDS_SLOW,	.p2_fast = I9XX_P2_LVDS_FAST },
+    },
+};
+
+static const intel_limit_t *intel_limit(struct drm_crtc *crtc)
+{
+	drm_device_t *dev = crtc->dev;
+	const intel_limit_t *limit;
+	
+	if (IS_I9XX(dev)) {
+		if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
+			limit = &intel_limits[INTEL_LIMIT_I9XX_LVDS];
+		else
+			limit = &intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC];
+	} else {
+		if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
+			limit = &intel_limits[INTEL_LIMIT_I8XX_LVDS];
+		else
+			limit = &intel_limits[INTEL_LIMIT_I8XX_DVO_DAC];
+	}
+	return limit;
+}
+
+/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */
+
+static void i8xx_clock(int refclk, intel_clock_t *clock)
+{
+	clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
+	clock->p = clock->p1 * clock->p2;
+	clock->vco = refclk * clock->m / (clock->n + 2);
+	clock->dot = clock->vco / clock->p;
+}
+
+/** Derive the pixel clock for the given refclk and divisors for 9xx chips. */
+
+static void i9xx_clock(int refclk, intel_clock_t *clock)
+{
+	clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
+	clock->p = clock->p1 * clock->p2;
+	clock->vco = refclk * clock->m / (clock->n + 2);
+	clock->dot = clock->vco / clock->p;
+}
+
+static void intel_clock(struct drm_device *dev, int refclk,
+			intel_clock_t *clock)
+{
+	if (IS_I9XX(dev))
+		return i9xx_clock (refclk, clock);
+	else
+		return i8xx_clock (refclk, clock);
+}
+
+/**
+ * Returns whether any output on the specified pipe is of the specified type
+ */
+bool intel_pipe_has_type (struct drm_crtc *crtc, int type)
+{
+    struct drm_device *dev = crtc->dev;
+    struct drm_mode_config *mode_config = &dev->mode_config;
+    struct drm_output *l_entry;
+
+    list_for_each_entry(l_entry, &mode_config->output_list, head) {
+	    if (l_entry->crtc == crtc) {
+		    struct intel_output *intel_output = l_entry->driver_private;
+		    if (intel_output->type == type)
+			    return true;
+	    }
+    }
+    return false;
+}
+
+#define INTELPllInvalid(s)   { /* ErrorF (s) */; return false; }
+/**
+ * Returns whether the given set of divisors are valid for a given refclk with
+ * the given outputs.
+ */
+
+static bool intel_PLL_is_valid(struct drm_crtc *crtc, intel_clock_t *clock)
+{
+	const intel_limit_t *limit = intel_limit (crtc);
+	
+	if (clock->p1  < limit->p1.min  || limit->p1.max  < clock->p1)
+		INTELPllInvalid ("p1 out of range\n");
+	if (clock->p   < limit->p.min   || limit->p.max   < clock->p)
+		INTELPllInvalid ("p out of range\n");
+	if (clock->m2  < limit->m2.min  || limit->m2.max  < clock->m2)
+		INTELPllInvalid ("m2 out of range\n");
+	if (clock->m1  < limit->m1.min  || limit->m1.max  < clock->m1)
+		INTELPllInvalid ("m1 out of range\n");
+	if (clock->m1 <= clock->m2)
+		INTELPllInvalid ("m1 <= m2\n");
+	if (clock->m   < limit->m.min   || limit->m.max   < clock->m)
+		INTELPllInvalid ("m out of range\n");
+	if (clock->n   < limit->n.min   || limit->n.max   < clock->n)
+		INTELPllInvalid ("n out of range\n");
+	if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
+		INTELPllInvalid ("vco out of range\n");
+	/* XXX: We may need to be checking "Dot clock" depending on the multiplier,
+	 * output, etc., rather than just a single range.
+	 */
+	if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
+		INTELPllInvalid ("dot out of range\n");
+	
+	return true;
+}
+
+/**
+ * Returns a set of divisors for the desired target clock with the given
+ * refclk, or FALSE.  The returned values represent the clock equation:
+ * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
+ */
+static bool intel_find_best_PLL(struct drm_crtc *crtc, int target,
+				int refclk, intel_clock_t *best_clock)
+{
+	drm_device_t *dev = crtc->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	intel_clock_t clock;
+	const intel_limit_t *limit = intel_limit(crtc);
+	int err = target;
+
+	if (IS_I9XX(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+	    (I915_READ(LVDS) & LVDS_PORT_EN) != 0) {
+		/*
+		 * For LVDS, if the panel is on, just rely on its current
+		 * settings for dual-channel.  We haven't figured out how to
+		 * reliably set up different single/dual channel state, if we
+		 * even can.
+		 */
+		if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
+		    LVDS_CLKB_POWER_UP)
+			clock.p2 = limit->p2.p2_fast;
+		else
+			clock.p2 = limit->p2.p2_slow;
+	} else {
+		if (target < limit->p2.dot_limit)
+			clock.p2 = limit->p2.p2_slow;
+		else
+			clock.p2 = limit->p2.p2_fast;
+	}
+	
+	memset (best_clock, 0, sizeof (*best_clock));
+	
+	for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
+		for (clock.m2 = limit->m2.min; clock.m2 < clock.m1 &&
+			     clock.m2 <= limit->m2.max; clock.m2++) {
+			for (clock.n = limit->n.min; clock.n <= limit->n.max;
+			     clock.n++) {
+				for (clock.p1 = limit->p1.min;
+				     clock.p1 <= limit->p1.max; clock.p1++) {
+					int this_err;
+					
+					intel_clock(dev, refclk, &clock);
+					
+					if (!intel_PLL_is_valid(crtc, &clock))
+						continue;
+					
+					this_err = abs(clock.dot - target);
+					if (this_err < err) {
+						*best_clock = clock;
+						err = this_err;
+					}
+				}
+			}
+		}
+	}
+
+	return (err != target);
+}
+
+void
+intel_wait_for_vblank(drm_device_t *dev)
+{
+	/* Wait for 20ms, i.e. one cycle at 50hz. */
+	udelay(20000);
+}
+
+void
+intel_pipe_set_base(struct drm_crtc *crtc, int x, int y)
+{
+	drm_device_t *dev = crtc->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = crtc->driver_private;
+	int pipe = intel_crtc->pipe;
+	unsigned long Start, Offset;
+	int dspbase = (pipe == 0 ? DSPABASE : DSPBBASE);
+	int dspsurf = (pipe == 0 ? DSPASURF : DSPBSURF);
+	
+	Start = crtc->fb->offset + dev_priv->baseaddr;
+	Offset = ((y * crtc->fb->pitch + x) * (crtc->fb->bits_per_pixel / 8));
+
+	DRM_DEBUG("Writing base %08lX %08lX %d %d\n", Start, Offset, x, y);
+	if (IS_I965G(dev)) {
+		I915_WRITE(dspbase, Offset);
+		I915_READ(dspbase);
+		I915_WRITE(dspsurf, Start);
+		I915_READ(dspsurf);
+	} else {
+		I915_WRITE(dspbase, Start + Offset);
+		I915_READ(dspbase);
+	}
+	
+
+	if (!dev_priv->sarea_priv) 
+		return;
+		
+	switch (pipe) {
+	case 0:
+		dev_priv->sarea_priv->pipeA_x = x;
+		dev_priv->sarea_priv->pipeA_y = y;
+		break;
+	case 1:
+		dev_priv->sarea_priv->pipeB_x = x;
+		dev_priv->sarea_priv->pipeB_y = y;
+		break;
+	default:
+		DRM_ERROR("Can't update pipe %d in SAREA\n", pipe);
+		break;
+	}
+}
+
+/**
+ * Sets the power management mode of the pipe and plane.
+ *
+ * This code should probably grow support for turning the cursor off and back
+ * on appropriately at the same time as we're turning the pipe off/on.
+ */
+static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+	drm_device_t *dev = crtc->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = crtc->driver_private;
+	int pipe = intel_crtc->pipe;
+	int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
+	int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
+	int dspbase_reg = (pipe == 0) ? DSPABASE : DSPBBASE;
+	int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
+	u32 temp;
+	bool enabled;
+
+	/* XXX: When our outputs are all unaware of DPMS modes other than off
+	 * and on, we should map those modes to DPMSModeOff in the CRTC.
+	 */
+	switch (mode) {
+	case DPMSModeOn:
+	case DPMSModeStandby:
+	case DPMSModeSuspend:
+		/* Enable the DPLL */
+		temp = I915_READ(dpll_reg);
+		if ((temp & DPLL_VCO_ENABLE) == 0) {
+			I915_WRITE(dpll_reg, temp);
+			I915_READ(dpll_reg);
+			/* Wait for the clocks to stabilize. */
+			udelay(150);
+			I915_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
+			I915_READ(dpll_reg);
+			/* Wait for the clocks to stabilize. */
+			udelay(150);
+			I915_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
+			I915_READ(dpll_reg);
+			/* Wait for the clocks to stabilize. */
+			udelay(150);
+		}
+		
+		/* Enable the pipe */
+		temp = I915_READ(pipeconf_reg);
+		if ((temp & PIPEACONF_ENABLE) == 0)
+			I915_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE);
+		
+		/* Enable the plane */
+		temp = I915_READ(dspcntr_reg);
+		if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
+			I915_WRITE(dspcntr_reg, temp | DISPLAY_PLANE_ENABLE);
+			/* Flush the plane changes */
+			I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
+		}
+		
+		intel_crtc_load_lut(crtc);
+		
+		/* Give the overlay scaler a chance to enable if it's on this pipe */
+		//intel_crtc_dpms_video(crtc, TRUE); TODO
+	break;
+	case DPMSModeOff:
+		/* Give the overlay scaler a chance to disable if it's on this pipe */
+		//intel_crtc_dpms_video(crtc, FALSE); TODO
+		
+		/* Disable the VGA plane that we never use */
+		I915_WRITE(VGACNTRL, VGA_DISP_DISABLE);
+		
+		/* Disable display plane */
+		temp = I915_READ(dspcntr_reg);
+		if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
+			I915_WRITE(dspcntr_reg, temp & ~DISPLAY_PLANE_ENABLE);
+			/* Flush the plane changes */
+			I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
+			I915_READ(dspbase_reg);
+		}
+		
+		if (!IS_I9XX(dev)) {
+			/* Wait for vblank for the disable to take effect */
+			intel_wait_for_vblank(dev);
+		}
+		
+		/* Next, disable display pipes */
+		temp = I915_READ(pipeconf_reg);
+		if ((temp & PIPEACONF_ENABLE) != 0) {
+			I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE);
+			I915_READ(pipeconf_reg);
+		}
+		
+		/* Wait for vblank for the disable to take effect. */
+		intel_wait_for_vblank(dev);
+		
+		temp = I915_READ(dpll_reg);
+		if ((temp & DPLL_VCO_ENABLE) != 0) {
+			I915_WRITE(dpll_reg, temp & ~DPLL_VCO_ENABLE);
+			I915_READ(dpll_reg);
+		}
+		
+		/* Wait for the clocks to turn off. */
+		udelay(150);
+		break;
+	}
+	
+
+	if (!dev_priv->sarea_priv)
+		return;
+
+	enabled = crtc->enabled && mode != DPMSModeOff;
+	
+	switch (pipe) {
+	case 0:
+		dev_priv->sarea_priv->pipeA_w = enabled ? crtc->mode.hdisplay : 0;
+		dev_priv->sarea_priv->pipeA_h = enabled ? crtc->mode.vdisplay : 0;
+		break;
+	case 1:
+		dev_priv->sarea_priv->pipeB_w = enabled ? crtc->mode.hdisplay : 0;
+		dev_priv->sarea_priv->pipeB_h = enabled ? crtc->mode.vdisplay : 0;
+		break;
+	default:
+		DRM_ERROR("Can't update pipe %d in SAREA\n", pipe);
+		break;
+	}
+}
+
+static bool intel_crtc_lock(struct drm_crtc *crtc)
+{
+   /* Sync the engine before mode switch */
+//   i830WaitSync(crtc->scrn);
+
+#if 0 // TODO def XF86DRI
+    return I830DRILock(crtc->scrn);
+#else
+    return FALSE;
+#endif
+}
+
+static void intel_crtc_unlock (struct drm_crtc *crtc)
+{
+#if 0 // TODO def XF86DRI
+    I830DRIUnlock (crtc->scrn);
+#endif
+}
+
+static void intel_crtc_prepare (struct drm_crtc *crtc)
+{
+	crtc->funcs->dpms(crtc, DPMSModeOff);
+}
+
+static void intel_crtc_commit (struct drm_crtc *crtc)
+{
+	crtc->funcs->dpms(crtc, DPMSModeOn);
+}
+
+void intel_output_prepare (struct drm_output *output)
+{
+	output->funcs->dpms(output, DPMSModeOff);
+}
+
+void intel_output_commit (struct drm_output *output)
+{
+	output->funcs->dpms(output, DPMSModeOn);
+}
+
+static bool intel_crtc_mode_fixup(struct drm_crtc *crtc,
+				  struct drm_display_mode *mode,
+				  struct drm_display_mode *adjusted_mode)
+{
+	return true;
+}
+
+
+/** Returns the core display clock speed for i830 - i945 */
+static int intel_get_core_clock_speed(drm_device_t *dev)
+{
+
+	/* Core clock values taken from the published datasheets.
+	 * The 830 may go up to 166 Mhz, which we should check.
+	 */
+	if (IS_I945G(dev))
+		return 400000;
+	else if (IS_I915G(dev))
+		return 333000;
+	else if (IS_I945GM(dev) || IS_845G(dev))
+		return 200000;
+	else if (IS_I915GM(dev)) {
+		u16 gcfgc = 0;
+
+		pci_read_config_word(dev->pdev, I915_GCFGC, &gcfgc);
+		
+		if (gcfgc & I915_LOW_FREQUENCY_ENABLE)
+			return 133000;
+		else {
+			switch (gcfgc & I915_DISPLAY_CLOCK_MASK) {
+			case I915_DISPLAY_CLOCK_333_MHZ:
+				return 333000;
+			default:
+			case I915_DISPLAY_CLOCK_190_200_MHZ:
+				return 190000;
+			}
+		}
+	} else if (IS_I865G(dev))
+		return 266000;
+	else if (IS_I855(dev)) {
+#if 0
+		PCITAG bridge = pciTag(0, 0, 0); /* This is always the host bridge */
+		u16 hpllcc = pciReadWord(bridge, I855_HPLLCC);
+		
+#endif
+		u16 hpllcc = 0;
+		/* Assume that the hardware is in the high speed state.  This
+		 * should be the default.
+		 */
+		switch (hpllcc & I855_CLOCK_CONTROL_MASK) {
+		case I855_CLOCK_133_200:
+		case I855_CLOCK_100_200:
+			return 200000;
+		case I855_CLOCK_166_250:
+			return 250000;
+		case I855_CLOCK_100_133:
+			return 133000;
+		}
+	} else /* 852, 830 */
+		return 133000;
+	
+	return 0; /* Silence gcc warning */
+}
+
+
+/**
+ * Return the pipe currently connected to the panel fitter,
+ * or -1 if the panel fitter is not present or not in use
+ */
+static int intel_panel_fitter_pipe (drm_device_t *dev)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	u32  pfit_control;
+    
+	/* i830 doesn't have a panel fitter */
+	if (IS_I830(dev))
+		return -1;
+    
+	pfit_control = I915_READ(PFIT_CONTROL);
+    
+	/* See if the panel fitter is in use */
+	if ((pfit_control & PFIT_ENABLE) == 0)
+		return -1;
+	
+	/* 965 can place panel fitter on either pipe */
+	if (IS_I965G(dev))
+		return (pfit_control >> 29) & 0x3;
+	
+	/* older chips can only use pipe 1 */
+	return 1;
+}
+
+static void intel_crtc_mode_set(struct drm_crtc *crtc,
+				struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode,
+				int x, int y)
+{
+	drm_device_t *dev = crtc->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = crtc->driver_private;
+	int pipe = intel_crtc->pipe;
+	int fp_reg = (pipe == 0) ? FPA0 : FPB0;
+	int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
+	int dpll_md_reg = (intel_crtc->pipe == 0) ? DPLL_A_MD : DPLL_B_MD;
+	int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
+	int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
+	int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
+	int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
+	int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
+	int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B;
+	int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B;
+	int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B;
+	int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE;
+	int dspstride_reg = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE;
+	int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS;
+	int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC;
+	int refclk;
+	intel_clock_t clock;
+	u32 dpll = 0, fp = 0, dspcntr, pipeconf;
+	bool ok, is_sdvo = false, is_dvo = false;
+	bool is_crt = false, is_lvds = false, is_tv = false;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct drm_output *output;
+
+	list_for_each_entry(output, &mode_config->output_list, head) {
+		struct intel_output *intel_output = output->driver_private;
+
+		if (output->crtc != crtc)
+			continue;
+
+		switch (intel_output->type) {
+		case INTEL_OUTPUT_LVDS:
+			is_lvds = TRUE;
+			break;
+		case INTEL_OUTPUT_SDVO:
+			is_sdvo = TRUE;
+			break;
+		case INTEL_OUTPUT_DVO:
+			is_dvo = TRUE;
+			break;
+		case INTEL_OUTPUT_TVOUT:
+			is_tv = TRUE;
+			break;
+		case INTEL_OUTPUT_ANALOG:
+			is_crt = TRUE;
+			break;
+		}
+	}
+	
+	if (IS_I9XX(dev)) {
+		refclk = 96000;
+	} else {
+		refclk = 48000;
+	}
+
+	ok = intel_find_best_PLL(crtc, adjusted_mode->clock, refclk, &clock);
+	if (!ok) {
+		DRM_ERROR("Couldn't find PLL settings for mode!\n");
+		return;
+	}
+
+	fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
+	
+	dpll = DPLL_VGA_MODE_DIS;
+	if (IS_I9XX(dev)) {
+		if (is_lvds)
+			dpll |= DPLLB_MODE_LVDS;
+		else
+			dpll |= DPLLB_MODE_DAC_SERIAL;
+		if (is_sdvo) {
+			dpll |= DPLL_DVO_HIGH_SPEED;
+			if (IS_I945G(dev) || IS_I945GM(dev)) {
+				int sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
+				dpll |= (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
+			}
+		}
+		
+		/* compute bitmask from p1 value */
+		dpll |= (1 << (clock.p1 - 1)) << 16;
+		switch (clock.p2) {
+		case 5:
+			dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
+			break;
+		case 7:
+			dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
+			break;
+		case 10:
+			dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
+			break;
+		case 14:
+			dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
+			break;
+		}
+		if (IS_I965G(dev))
+			dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
+	} else {
+		if (is_lvds) {
+			dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+		} else {
+			if (clock.p1 == 2)
+				dpll |= PLL_P1_DIVIDE_BY_TWO;
+			else
+				dpll |= (clock.p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+			if (clock.p2 == 4)
+				dpll |= PLL_P2_DIVIDE_BY_4;
+		}
+	}
+	
+	if (is_tv) {
+		/* XXX: just matching BIOS for now */
+/*	dpll |= PLL_REF_INPUT_TVCLKINBC; */
+		dpll |= 3;
+	}
+#if 0
+	else if (is_lvds)
+		dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
+#endif
+	else
+		dpll |= PLL_REF_INPUT_DREFCLK;
+	
+	/* Set up the display plane register */
+	dspcntr = DISPPLANE_GAMMA_ENABLE;
+
+	switch (crtc->fb->bits_per_pixel) {
+	case 8:
+		dspcntr |= DISPPLANE_8BPP;
+		break;
+	case 16:
+		if (crtc->fb->depth == 15)
+			dspcntr |= DISPPLANE_15_16BPP;
+		else
+			dspcntr |= DISPPLANE_16BPP;
+		break;
+	case 32:
+		dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
+		break;
+	default:
+		DRM_ERROR("Unknown color depth\n");
+		return;
+	}
+	
+
+	if (pipe == 0)
+		dspcntr |= DISPPLANE_SEL_PIPE_A;
+	else
+		dspcntr |= DISPPLANE_SEL_PIPE_B;
+	
+	pipeconf = I915_READ(pipeconf_reg);
+	if (pipe == 0 && !IS_I965G(dev)) {
+		/* Enable pixel doubling when the dot clock is > 90% of the (display)
+		 * core speed.
+		 *
+		 * XXX: No double-wide on 915GM pipe B. Is that the only reason for the
+		 * pipe == 0 check?
+		 */
+		if (mode->clock > intel_get_core_clock_speed(dev) * 9 / 10)
+			pipeconf |= PIPEACONF_DOUBLE_WIDE;
+		else
+			pipeconf &= ~PIPEACONF_DOUBLE_WIDE;
+	}
+
+	dspcntr |= DISPLAY_PLANE_ENABLE;
+	pipeconf |= PIPEACONF_ENABLE;
+	dpll |= DPLL_VCO_ENABLE;
+
+	
+	/* Disable the panel fitter if it was on our pipe */
+	if (intel_panel_fitter_pipe(dev) == pipe)
+		I915_WRITE(PFIT_CONTROL, 0);
+
+	DRM_DEBUG("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
+	drm_mode_debug_printmodeline(dev, mode);
+	
+#if 0
+	if (!xf86ModesEqual(mode, adjusted_mode)) {
+		xf86DrvMsg(pScrn->scrnIndex, X_INFO,
+			   "Adjusted mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
+		xf86PrintModeline(pScrn->scrnIndex, mode);
+	}
+	i830PrintPll("chosen", &clock);
+#endif
+
+	if (dpll & DPLL_VCO_ENABLE) {
+		I915_WRITE(fp_reg, fp);
+		I915_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE);
+		I915_READ(dpll_reg);
+		udelay(150);
+	}
+	
+	/* The LVDS pin pair needs to be on before the DPLLs are enabled.
+	 * This is an exception to the general rule that mode_set doesn't turn
+	 * things on.
+	 */
+	if (is_lvds) {
+		u32 lvds = I915_READ(LVDS);
+		
+		lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP | LVDS_PIPEB_SELECT;
+		/* Set the B0-B3 data pairs corresponding to whether we're going to
+		 * set the DPLLs for dual-channel mode or not.
+		 */
+		if (clock.p2 == 7)
+			lvds |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
+		else
+			lvds &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
+		
+		/* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
+		 * appropriately here, but we need to look more thoroughly into how
+		 * panels behave in the two modes.
+		 */
+		
+		I915_WRITE(LVDS, lvds);
+		I915_READ(LVDS);
+	}
+	
+	I915_WRITE(fp_reg, fp);
+	I915_WRITE(dpll_reg, dpll);
+	I915_READ(dpll_reg);
+	/* Wait for the clocks to stabilize. */
+	udelay(150);
+	
+	if (IS_I965G(dev)) {
+		int sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
+		I915_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) |
+			   ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT));
+	} else {
+		/* write it again -- the BIOS does, after all */
+		I915_WRITE(dpll_reg, dpll);
+	}
+	I915_READ(dpll_reg);
+	/* Wait for the clocks to stabilize. */
+	udelay(150);
+	
+	I915_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) |
+		   ((adjusted_mode->crtc_htotal - 1) << 16));
+	I915_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) |
+		   ((adjusted_mode->crtc_hblank_end - 1) << 16));
+	I915_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) |
+		   ((adjusted_mode->crtc_hsync_end - 1) << 16));
+	I915_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) |
+		   ((adjusted_mode->crtc_vtotal - 1) << 16));
+	I915_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) |
+		   ((adjusted_mode->crtc_vblank_end - 1) << 16));
+	I915_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) |
+		   ((adjusted_mode->crtc_vsync_end - 1) << 16));
+	I915_WRITE(dspstride_reg, crtc->fb->pitch * (crtc->fb->bits_per_pixel / 8));
+	/* pipesrc and dspsize control the size that is scaled from, which should
+	 * always be the user's requested size.
+	 */
+	I915_WRITE(dspsize_reg, ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1));
+	I915_WRITE(dsppos_reg, 0);
+	I915_WRITE(pipesrc_reg, ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
+	I915_WRITE(pipeconf_reg, pipeconf);
+	I915_READ(pipeconf_reg);
+	
+	intel_wait_for_vblank(dev);
+	
+	I915_WRITE(dspcntr_reg, dspcntr);
+	
+	/* Flush the plane changes */
+	intel_pipe_set_base(crtc, x, y);
+	
+#ifdef XF86DRI // TODO
+//   I830DRISetVBlankInterrupt (pScrn, TRUE);
+#endif
+	
+	intel_wait_for_vblank(dev);    
+}
+
+/** Loads the palette/gamma unit for the CRTC with the prepared values */
+void intel_crtc_load_lut(struct drm_crtc *crtc)
+{
+	drm_device_t *dev = crtc->dev;
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = crtc->driver_private;
+	int palreg = (intel_crtc->pipe == 0) ? PALETTE_A : PALETTE_B;
+	int i;
+
+	/* The clocks have to be on to load the palette. */
+	if (!crtc->enabled)
+		return;
+
+	for (i = 0; i < 256; i++) {
+		I915_WRITE(palreg + 4 * i,
+			   (intel_crtc->lut_r[i] << 16) |
+			   (intel_crtc->lut_g[i] << 8) |
+			   intel_crtc->lut_b[i]);
+	}
+}
+
+/** Sets the color ramps on behalf of RandR */
+static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
+				 u16 *blue, int size)
+{
+	struct intel_crtc *intel_crtc = crtc->driver_private;
+	int i;
+	
+	for (i = 0; i < 256; i++) {
+		intel_crtc->lut_r[i] = red[i] >> 8;
+		intel_crtc->lut_g[i] = green[i] >> 8;
+		intel_crtc->lut_b[i] = blue[i] >> 8;
+	}
+	
+	intel_crtc_load_lut(crtc);
+}
+
+/* Returns the clock of the currently programmed mode of the given pipe. */
+static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = crtc->driver_private;
+	int pipe = intel_crtc->pipe;
+	u32 dpll = I915_READ((pipe == 0) ? DPLL_A : DPLL_B);
+	u32 fp;
+	intel_clock_t clock;
+
+	if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
+		fp = I915_READ((pipe == 0) ? FPA0 : FPB0);
+	else
+		fp = I915_READ((pipe == 0) ? FPA1 : FPB1);
+
+	clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
+	clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
+	clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
+	if (IS_I9XX(dev)) {
+		clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >>
+			       DPLL_FPA01_P1_POST_DIV_SHIFT);
+
+		switch (dpll & DPLL_MODE_MASK) {
+		case DPLLB_MODE_DAC_SERIAL:
+			clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ?
+				5 : 10;
+			break;
+		case DPLLB_MODE_LVDS:
+			clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ?
+				7 : 14;
+			break;
+		default:
+			DRM_DEBUG("Unknown DPLL mode %08x in programmed "
+				  "mode\n", (int)(dpll & DPLL_MODE_MASK));
+			return 0;
+		}
+
+		/* XXX: Handle the 100Mhz refclk */
+		i9xx_clock(96000, &clock);
+	} else {
+		bool is_lvds = (pipe == 1) && (I915_READ(LVDS) & LVDS_PORT_EN);
+
+		if (is_lvds) {
+			clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
+				       DPLL_FPA01_P1_POST_DIV_SHIFT);
+			clock.p2 = 14;
+
+			if ((dpll & PLL_REF_INPUT_MASK) ==
+			    PLLB_REF_INPUT_SPREADSPECTRUMIN) {
+				/* XXX: might not be 66MHz */
+				i8xx_clock(66000, &clock);
+			} else
+				i8xx_clock(48000, &clock);		
+		} else {
+			if (dpll & PLL_P1_DIVIDE_BY_TWO)
+				clock.p1 = 2;
+			else {
+				clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
+					    DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
+			}
+			if (dpll & PLL_P2_DIVIDE_BY_4)
+				clock.p2 = 4;
+			else
+				clock.p2 = 2;
+
+			i8xx_clock(48000, &clock);
+		}
+	}
+
+	/* XXX: It would be nice to validate the clocks, but we can't reuse
+	 * i830PllIsValid() because it relies on the xf86_config output
+	 * configuration being accurate, which it isn't necessarily.
+	 */
+
+	return clock.dot;
+}
+
+/** Returns the currently programmed mode of the given pipe. */
+struct drm_display_mode *intel_crtc_mode_get(drm_device_t *dev,
+					     struct drm_crtc *crtc)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = crtc->driver_private;
+	int pipe = intel_crtc->pipe;
+	struct drm_display_mode *mode;
+	int htot = I915_READ((pipe == 0) ? HTOTAL_A : HTOTAL_B);
+	int hsync = I915_READ((pipe == 0) ? HSYNC_A : HSYNC_B);
+	int vtot = I915_READ((pipe == 0) ? VTOTAL_A : VTOTAL_B);
+	int vsync = I915_READ((pipe == 0) ? VSYNC_A : VSYNC_B);
+
+	mode = kzalloc(sizeof(*mode), GFP_KERNEL);
+	if (!mode)
+		return NULL;
+
+	mode->clock = intel_crtc_clock_get(dev, crtc);
+	mode->hdisplay = (htot & 0xffff) + 1;
+	mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
+	mode->hsync_start = (hsync & 0xffff) + 1;
+	mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
+	mode->vdisplay = (vtot & 0xffff) + 1;
+	mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
+	mode->vsync_start = (vsync & 0xffff) + 1;
+	mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
+	/* FIXME: pull name generation into a common routine */
+	snprintf(mode->name, DRM_DISPLAY_MODE_LEN, "%dx%d", mode->hdisplay,
+		 mode->vdisplay);
+	drm_mode_set_crtcinfo(mode, 0);
+
+	return mode;
+}
+
+static const struct drm_crtc_funcs intel_crtc_funcs = {
+	.dpms = intel_crtc_dpms,
+	.lock = intel_crtc_lock,
+	.unlock = intel_crtc_unlock,
+	.mode_fixup = intel_crtc_mode_fixup,
+	.mode_set = intel_crtc_mode_set,
+	.gamma_set = intel_crtc_gamma_set,
+	.prepare = intel_crtc_prepare,
+	.commit = intel_crtc_commit,
+};
+
+
+void intel_crtc_init(drm_device_t *dev, int pipe)
+{
+	struct drm_crtc *crtc;
+	struct intel_crtc *intel_crtc;
+	int i;
+
+	crtc = drm_crtc_create(dev, &intel_crtc_funcs);
+	if (crtc == NULL)
+		return;
+
+	intel_crtc = kzalloc(sizeof(struct intel_crtc), GFP_KERNEL);
+	if (intel_crtc == NULL) {
+		kfree(crtc);
+		return;
+	}
+
+	intel_crtc->pipe = pipe;
+	for (i = 0; i < 256; i++) {
+		intel_crtc->lut_r[i] = i;
+		intel_crtc->lut_g[i] = i;
+		intel_crtc->lut_b[i] = i;
+	}
+
+	crtc->driver_private = intel_crtc;
+}
+
+int intel_output_clones(drm_device_t *dev, int type_mask)
+{
+	int index_mask = 0;
+	struct drm_output *output;
+	int entry = 0;
+
+        list_for_each_entry(output, &dev->mode_config.output_list, head) {
+		struct intel_output *intel_output = output->driver_private;
+		if (type_mask & (1 << intel_output->type))
+			index_mask |= (1 << entry);
+		entry++;
+	}
+	return index_mask;
+}
+
+
+static void intel_setup_outputs(drm_device_t *dev)
+{
+	struct drm_output *output;
+
+	intel_crt_init(dev);
+
+	/* Set up integrated LVDS */
+	if (IS_MOBILE(dev) && !IS_I830(dev))
+		intel_lvds_init(dev);
+
+	if (IS_I9XX(dev)) {
+		intel_sdvo_init(dev, SDVOB);
+		intel_sdvo_init(dev, SDVOC);
+	}
+
+	list_for_each_entry(output, &dev->mode_config.output_list, head) {
+		struct intel_output *intel_output = output->driver_private;
+		int crtc_mask = 0, clone_mask = 0;
+		
+		/* valid crtcs */
+		switch(intel_output->type) {
+		case INTEL_OUTPUT_DVO:
+		case INTEL_OUTPUT_SDVO:
+			crtc_mask = ((1 << 0)|
+				     (1 << 1));
+			clone_mask = ((1 << INTEL_OUTPUT_ANALOG) |
+				      (1 << INTEL_OUTPUT_DVO) |
+				      (1 << INTEL_OUTPUT_SDVO));
+			break;
+		case INTEL_OUTPUT_ANALOG:
+			crtc_mask = ((1 << 0));
+			clone_mask = ((1 << INTEL_OUTPUT_ANALOG) |
+				      (1 << INTEL_OUTPUT_DVO) |
+				      (1 << INTEL_OUTPUT_SDVO));
+			break;
+		case INTEL_OUTPUT_LVDS:
+			crtc_mask = (1 << 1);
+			clone_mask = (1 << INTEL_OUTPUT_LVDS);
+			break;
+		case INTEL_OUTPUT_TVOUT:
+			crtc_mask = ((1 << 0) |
+				     (1 << 1));
+			clone_mask = (1 << INTEL_OUTPUT_TVOUT);
+			break;
+		}
+		output->possible_crtcs = crtc_mask;
+		output->possible_clones = intel_output_clones(dev, clone_mask);
+	}
+}
+
+void intel_modeset_init(drm_device_t *dev)
+{
+	int num_pipe;
+	int i;
+
+	drm_mode_config_init(dev);
+
+	dev->mode_config.min_width = 0;
+	dev->mode_config.min_height = 0;
+
+	dev->mode_config.max_width = 4096;
+	dev->mode_config.max_height = 4096;
+
+	if (IS_MOBILE(dev) || IS_I9XX(dev))
+		num_pipe = 2;
+	else
+		num_pipe = 1;
+	DRM_DEBUG("%d display pipe%s available.\n",
+		  num_pipe, num_pipe > 1 ? "s" : "");
+
+	for (i = 0; i < num_pipe; i++) {
+		intel_crtc_init(dev, i);
+	}
+
+	intel_setup_outputs(dev);
+
+	//drm_initial_config(dev, false);
+	//drm_set_desired_modes(dev);
+}
+
+void intel_modeset_cleanup(drm_device_t *dev)
+{
+	drm_mode_config_cleanup(dev);
+}